Fenix

The thermoplastic resin is especially suitable for interior applications. It can be used both vertically and horizontally. The Fenix material offers an extremely closed surface and a particularly soft feel. The uneven surface in the nano range ensures very low light reflection. Fenix is therefore an extremely matt surface that leaves hardly any visible fingerprints. The material is insensitive to scratches and resistant to abrasion.

• CARE: Synthetic resin surfaces can be easily cleaned with commercially available rinsing and cleaning agents. Cleaning agents diluted with water should be applied with a soft cloth in a damp state. Immediate drying with a soft cloth is important. In case of heavy or stubborn dirt and stains, we recommend cleaning the surface with a wet cleaning sponge and a cream cleaner such as Potz, Cifcrem, Vifcreme, etc. The sponge used must be compatible with glass (with blue or white Scotch fleece, non-scratching). During application, small circular movements should be avoided so that no scrubbing marks appear. Always use the rough surface (fleece part) of the cleaning sponge to rub in. Remove the cream cleaner after application with a cloth and plenty of clear water. Then dry the Fenix plate with a microfibre cloth.
  We recommend the following cleaning products for stubborn stains:

• Lemon Balm: Use with water according to manufacturer's instructions. Rub the Fenix surface well with circular movements and then rinse with clear water and dry with a microfibre cloth.
• Nano sponge: To remove simple stains on your Fenix plate, we also recommend treatment with the Kerapur dirt eraser/cleaning sponge (nano sponge) according to the instructions for use of the product.